_{* EOS Guide: Keep your EOS account SAFE using Multisig Structure https://steemit.com/eos/@eosdacvietnam/eos-guide-keep-your-eos-account-safe-using-multisig-structure} _{* EOS Guide: Create Custom EOS Permissions For Each DApp https://steemit.com/eos/@eosdacvietnam/eos-guide-create-custom-eos-permissions-for-each-dapp} Today, I am gonna show you how to use Waits (TX Delay) to keep your EOS account SAFE.

What is WAITS?

Specifying waits allows a user to ensure that transaction may not be executed without a required delay. Look at my testing account first: ![](https://cdn.steemitimages.com/DQmNPAph3kJfbhRdERVietF2nm1gJ8H9TuSsGnLXkeaJgdb/image.png) There is no wait on account4test. I will add waits to active permission.

Let's start!

I. Add Waits

Login your EOS account with your Active Key on [bloks.io](https://bloks.io/) => [Wallet](https://bloks.io/wallet) => [Permissions Manager](https://bloks.io/wallet/permissions-manager) ![](https://cdn.steemitimages.com/DQmbyi7ChBYjLotqZXmCuU7pv84rJh7bv1S1eBZ96wUw6zv/image.png) Change the info: ![](https://cdn.steemitimages.com/DQmX3P23WHfs73ZtAyd8xKzbqTkeNiaN5eHC4T3u8dv3ass/image.png) * Threshold (always >=2): 2 * Keys: * change the threshold of EOS8gKJKboCpK1XtoM3EajUDLZ6rVubBjN5TifMw6q1sHav3smCrS to 2 (I change it just for backup or make any transaction immediately when needed. You can keep 1) * Add a new key EOS63MkrMsTUrKwK5LshQnahRCpQPtaq4deLXNQca446Y4GFAQ5r6 with threshold 1 * Waits (always < threshold): 1 Click Save Permission When completed, check out your account permissions ![](https://cdn.steemitimages.com/DQmfCvPAJcWAffia5Tbz7rYYNeM1iu5zVst6RPBJcA3t8TJ/image.png)

II. Let's test!

In this guide, I am gonna transfer tokens 1)Using Keys (Singlesig Mode) * Login with the new key EOS63MkrMsTUrKwK5LshQnahRCpQPtaq4deLXNQca446Y4GFAQ5r6 ![](https://cdn.steemitimages.com/DQmUbKEBz5Luu9H9P48cEubKA3sHRHXXGJQBuxzqvV6Nm6X/image.png) * To satisfy the new permission: I will schedule the transaction to be delayed by 3 minutes and provide authorization for the key EOS63MkrMsTUrKwK5LshQnahRCpQPtaq4deLXNQca446Y4GFAQ5r6 * Change TX Delay (s) to 180 seconds (3 minutes) ![](https://cdn.steemitimages.com/DQmbZnancbzJdwW4N6j143aManmmHcdKkTDiXiYNshZz8qz/image.png) * Go to [Wallet](https://bloks.io/wallet) => Transfer Tokens ![](https://cdn.steemitimages.com/DQmRzXVaRxJDvFhUDvLeHAMftWgsXVLjM1SpfJ9ueXsv6aK/image.png) * Click on Transfer 0.1 EOS to iloveueosdac ![](https://cdn.steemitimages.com/DQmbW2XiNAG4Gv4xXDMYFWEJt7dHiCGzX4AaSdfScMRsMxU/image.png) * Then click on TX 0e6cb9034de72a45004666944aaa233bed9a8734c6bb3a7a98d9a0baa7ffd425 * You will see ![](https://cdn.steemitimages.com/DQmaaNHZc6dMzEUM18M6JMpS5Cba3DMY3oDaxbT9hThsaaq/image.png) Transaction Not Found: the transaction is only going online after 3 minutes. However, that consumed some RAM (that shows the transaction is about to go online) ![](https://cdn.steemitimages.com/DQmTjhxd6WrcFb56nkntSCWk29S46hDPVo6wyjuAkfE9Q8Y/image.png) * 3 minutes later, you refresh the page and see the transaction online ![](https://cdn.steemitimages.com/DQmSAKZrRsJV7tFPVnTgaxZgSi1NjXw1MrrsKkahK2AGegp/image.png) The transaction is done! 2)Using Accounts (Multisig Mode) * I change my account active permissions ![](https://cdn.steemitimages.com/DQma6s7zgDnqSiPsMqpHwVBQakRXC4cikKk8R4XecgauuZv/image.png) _{How to make a multisig tx: https://steemit.com/eos/@eosdacvietnam/eos-guide-keep-your-eos-account-safe-using-multisig-structure} * Requirements: * Number of accounts >= 2 * When prososing a Multisig Transaction, before click Propose, click Show on ![](https://cdn.steemitimages.com/DQmTfnKYHHKvkhj8GkRV88gp8FT2oWEQRkP3RgaFhwX7D9g/image.png) first, you will see ![](https://cdn.steemitimages.com/DQmfM5VNgAdyzVRuuv1LeKFxgr36g1oXArLjLkp17Nn5yJ5/image.png) Focus on delay_sec, change 0 to 180 (180 seconds = 3 minutes) to satisfy the threshold 3 minutes. That is why in Requested Approvals, you just put on 2 accounts. Then, approve and execute the TX.

NOTE:

* If you use the key with the highest threshold, Waits (TX Delay) is Optional. You can put any TX Delay. No need to be like the Waits on your EOS account. * If you use the key with lower threshold, Waits (TX Delay) is required and must be the same as the Waits on your EOS account.

IMPORTANT:

For Scatter v11, you have to go to Settings => Firewall => Remove eosio.msig [![](https://cdn.steemitimages.com/DQmReQj3D2My9so7vzqE9rRppYULYeDhnvZxdyEeJNTdNja/image.png)](https://eosdac.io)

Hãy bỏ phiếu cho eosdacserver

Đăng ký [bản tin của chúng tôi](https://eosdac.io/news/#newsletter) để nhận thông báo và theo dõi chúng tôi trên các nền tảng mạng xã hội yêu thích của bạn: _{Steemit | Discord | Telegram | Facebook | Twitter | Google-plus | Github | Instagram | Linkedin | Medium | Reddit | YouTube | Weibo| VK| Bihu}