Intro Image created with Inshot

Good Day Great People of #DIYHUB . Today I'm going to be Sharing How I Converted a Piece of Carton to a Carton BMW M4 G82. Since I'm a Fan of Muscle and Racing Cars I decided to Create one of my Favorite Cars the BMW M4 G82 with a Piece of Carton. It's really been a While since I made cool stuffs using only Carton. And today's task really made me to think Hard a little bit. * * *

Here are the Few Materials I used to Accomplish this Task

* An Aluminum Rod * A syringe * Glue * Rollers from An Old Printer * Carton *

Blue Film from an Old Book

*

White Paper

*

Blue Pen

*

A Ruler

*

A Pencil

* * *

My Procedures

1.

The First Task was to make Sketch of the Dorsal View of The Car In the Carton that I'll use to start the structure. (Note that I copied this image from Google)

* * *

Drawing of the Dorsal View of the Car

Cutting the Sketch

2. Now I'm done with the Sketch, I now Cut the Sketch which would be used to form the structure. * * *

Draw the Chassis

3. As we Know, In a car 🚗 the part that holds and carries the parts of the Car is the Chassis. So we draw the something that would serve as Chassis. When I'm done with the Drawing I then cut.

* * *

Add Reinforcement

Add the cut Syringe were the Tyre would Seat

1. 4\. Now we add Reinforcement to the Chassis we've Created so that it'll be able to carry the body without bending. After adding reinforcement we then add the Syringe we cut were the Tyres and Aluminum Rod would sit in. * * * Gum the Chassis and Sides of the Car to form the structure

Gum the Chassis and Sides of the Car to form the structure

5\. Next, we add the Chassis and Sides of the car together by using Glue. * * *

Add the Top

Add the Back of the Car

6\. We Add the Top and Back of the car with Carton * * *

7.I then Draw the Front of the Car which I'll add to the Body. After Drawing it, I then had Attached it to the Body of the Car Which makes it to have a Good Look. * * *

8\. The Next Step I took was to Draw the Chassis of the Tyre with Carton and Attach it to the Old Printer Roller who I used as the Tyre. * * *

9.The Next Step I took was to Draw Our Hive Logo with a Caption "**HIVE DI**Y". I not that Good in drawing be it's been a While (2 Years Ago) I made Drawing of anything. But I just had to do my Best to Draw something that looks like the Hive Logo. * * *

Finally I Added a Blue Film from an Old Book and also the Logo I Drew. Now I'm done with adding all the Pieces together, Here is My Final Result. * * * Thanks for Going through my Post Dear Reader and Thanks for Dropping By. Cat Love GIF by Mochimons

_All My Images were Originally taken By Me with My Two Phones (Oppo A17k and Infinix Hot 10 Play)_ * * *