https://steemitimages.com/DQmPt19E2WveCaKU8j2xqJUpS6kiNpEeYAmgQvRkKhkJBex/skywire-the-next-internet.png

Skycoin:

Skycoin is a premier project that utilizes blockchain for a newly decentralized networking protocol, replacing IP addresses with public keys for end to end encryption. This revolutionary blockchain has the potential to completely overhaul the current internet & evolve into a "Web 3.0". The implications & real use cases for an earnest change, not only in how we interact in a peer to peer setting, but also putting forth the infrastructure necessary for community based, community controlled networking. If bitcoin was the prototype for decentralized economics; Skycoin is the expansion of that methodology. Skycoin improves on current consensus algorithms with the implementation of Obelisk & the addition of a hardware solution known as the Skyminer. The Skyminer is one of, if not the only physical product a blockchain project has shipped to integrate blockchain solutions into tangible real world obstacles.

https://steemitimages.com/DQmP57EN6RrMGax1zVVuqmAsd93iRmQhFwdPevQURGgCTmo/Skycoin%20Ecosystem.png

Skyminer:

The Skyminer is the hardware platform for the implementation of a decentralized internet. When Skyminers are built the users deploys skynodes that will provide bandwidth for the network. In turn the user's will be paid an allocation of Skycoin for their services. This is an introduction to the Skycoin economic model. Where Skycoin community members are compensated for their role in the implementation & expansion of a new internet protocol.

Building a D.I.Y Skyminer:

The following is a guide for users who want to be involved in the early implementation of Skywire.

Parts List:

8X ODROID C2
8X Samsung 32GB EVO Plus Class 10 Micro SDHC
8X 1FT Micro USB to USB Charger Cable
8X 1FT Cat6 Ethernet Cable
2X GeauxRobot Raspberry Pi 3 Model B 4-layer Stack Clear Case Box Enclosure
1X TP-Link 16-Port Gigabit Ethernet Unmanaged Switch
1X Anker 60W 10-Port USB Wall Charger
1x Tmobile TM-AC1900 Router

Why the ODROID - C2 instead of a Raspberry Pi / Orange Pi Prime ?

Currently as of this writing, Orange Pi Primes are out of stock, the aim was to find a board that was similar or better while still staying compatible with the software necessary to run the nodes. The ODroid-C2 was the perfect mid range between an Orange Pi Prime and other boards such as the current line of Rasberry Pi's. The ODroid-C2 also utilizes the same form factor as the readily available Raspberry Pi, which made finding a case for a cluster easy. Below are the side by side specifications for each board.

https://steemitimages.com/DQmVd7EJ8tcuR4wKMk6hLLihgNqRnW9xjjNtBE2KVxaXMyT/ComparisonFont.png

https://steemitimages.com/DQmexfPbXWiLxu433yL7gJaNYXmdDSaPno9rZ4qya8UbMjx/Odroid%20Vs%20Rpi.png

Installing AsusWRT Merlin on your TM-AC1900 Router

Installing the Operating System on the Micro SD Cards

Download & install the latest Etcher software for your system
Download & install Armbian for your board, you may need to unzip file
Download & install Putty, later on you will use this to SSH into the Odroid boards
Insert your card into the computer using your MicroSD to USB adapter
Open Etcher; your microSD should automatically populate, select the Armbian image you downloaded earlier & click "Flash!"

https://steemitimages.com/DQmSrstpCVqSrBDSz4Rukgdck8u8N89sjoYHASpJwAUYJDb/EtcherFlash.png

Eject your microSD card from your PC (Safely)
Repeat for the next seven microSD cards
Install microSD cards into each Odroid C2

https://steemitimages.com/DQmcKU8R2pn7R4uv8KafBsNeHBuoSYwz1mNpeKCb7zhvpso/Odroid_SD.png

Hardware Setup & Installation

Install your Odroid's into a cluster using the clear acrylic enclosures
Install the 1FT USB power cords into the micro USB ports on the Odroid's
Install the CAT6 ethernet cables into each Odroid Gigabit ethernet port
Connect your usb cables to the Anker power bank
Install each ethernet cable into the back of the 16-Port Gigabit Ethernet Unmanaged Switch
Connect an ethernet cord from the yellow LAN port to your 16-Port Ethernet switch

https://steemitimages.com/DQmPLQ52ZxCN5VVJXV34HFmnJh4EtqRmoDCgJcjNiqzqNPq/IMG_0618.jpg

Assign Static IP's to Odroids (AsusWRT)

Open a browser and navigate to 192.168.29.1 (or the default IP address of your router)
Select LAN under Advanced Settings > DHCP Server tab >Enable Manual Assignment > Yes
In the DHCP section you may select the drop down menu under "Mac Address"
Select your Odroid's IP address and change the Hostname to Odroid No.1
Do the same for the other Odroid IP's numbering them perspectively
Write down the IP addresses of your Odroids for later use

https://steemitimages.com/DQmd5gPe8sfGXPvJ3V8yMxva59sgBWkc9wSaFSpzKn41oDm/static_odroid.png

Armbian Configuration

Open Putty to SSH into your Odroids
Enter the static IP for your first Odroid

https://steemitimages.com/DQmdUzWpC3jD4Hiy3Wdd6CuLiefN4BkcaEk4ZoZ2jzJJDBX/puttyssh.png

login: root

password: 1234

Once you login you will see prompts to change your password
Enter the default password "1234" and then proceed to change your password
You will be prompted to create a new username and password
Follow directions on the command line to create a username and password
No need to enter in your name and personal information, click enter until asked to save, then type "Y" and enter again
Update Armbian using the following commands

sudo apt update

sudo apt upgrade

Install & setup Skywire Nodes

SSH into your first Odroid
Login with root and your password

https://steemitimages.com/DQmZ2Z6oK2Q9UVrEkmNYb698SC6ia1LWQQMkDnQwhg7xrtN/odroid_cd.png

Enter the following commands after logging into your Odroid

cd

curl -L https://dl.google.com/go/go1.10.linux-arm64.tar.gz

cd /usr/local/

tar xzvf /root/go1.10.linux-arm64.tar.gz

ln -s /usr/local/go/bin/go /usr/local/bin/go

ln -s /usr/local/go/bin/godoc /usr/local/bin/godoc

ln -s /usr/local/go/bin/gofmt /usr/local/bin/gofmt

mkdir -p $HOME/go

mkdir -p $HOME/go/bin

mkdir -p $HOME/go/src

mkdir -p $HOME/go/pkg

cd ~

vi .bashrc

Edit the file by pressing "I" to edit
Navigate to the bottom of the file and add the following to the file:

export GOROOT=/usr/local/go

export GOPATH=$HOME/go

export GOBIN=$GOPATH/bin

export PATH=$PATH:$GOBIN

https://steemitimages.com/DQmWtGqbkEqrsgCK8fY2Km2f3XQXxMAMea3dYMoJvwbVruA/editBashFile1111.png

Press ESC and type ':wq!" to save the file and exit
to continue enter the following commands

source ~/.bashrc

go get github.com/skycoin/skycoin/...     

cd $GOPATH/src/github.com/skycoin

git clone https://github.com/skycoin/skywire.git 

cd $GOPATH/src/github.com/skycoin/skywire/cmd

go install ./... 

apt install tmux

Enter "Y" and press enter
Enter in command line

reboot now

Start a new Putty session
Insert the following code into command line

cd $GOPATH/bin

tmux

./manager -web-dir ${GOPATH}/src/github.com/skycoin/skywire/static/skywire-manager

start a new putty window

cd $GOPATH/bin

tmux

./node -connect-manager -manager-address :5998 -manager-web :8000 -discovery-address messenger.skycoin.net:5999-028667f86c17f1b4120c5bf1e58f276cbc1110a60e80b7dc8bf291c6bec9970e74 -address :5000 -web-port :6001

Now navigate to your browser
Enter the IP address of your first Odroid, at the end add ":8000"
Example "192.168.1.132:8000" assuming 192.168.1.132 is the static IP of your first Odroid
The following page should display:

https://steemitimages.com/DQmWgiCXqQRGsrWt1qgZ1bSwWLE9CpTdZ37hMNVUPEuHbHZ/skywireManager.png

The default password is: 1234
Once logged in the skywire manager should display your first node, its status and the public key

Installing Nodes 2-8

Repeat all steps after hardware setup using the new IP address you setup in AsusWRT
Once you get to the last command after starting your second Putty session
At the end use the following code instead of your prevous ./node-connect-manager code
Replacing "ODROID IP ADDRESS" with the Ip address of your new Odroid

./node -connect-manager -manager-address "ODROID IP ADDRESS":5998 -manager-web "ODROID IP ADDRESS":8000 -discovery-address messenger.skycoin.net:5999-028667f86c17f1b4120c5bf1e58f276cbc1110a60e80b7dc8bf291c6bec9970e74 -address :5000 -web-port :6001

Repeat for the next Odroid until you've completed all eight nodes
The Skywire manager should show all 8 nodes as "Online"
Enjoy paving the way for the next generation of internet

learn more http://skycoin.net/

Skycoin Tips: Stmam2QV7rRsCme73GPf9veS8jWL6G1tzn