# Wall Mounted Hay Feeder For Barn ![Feeder_7.jpg](https://steemitimages.com/DQmX1QEinrKjLAzt9G4MJXbnUaBgZEimxBDYVsSVvWbajj4/Feeder_7.jpg) # A recent project that we did, was to build wall mounted hay feeders in our barn. It was a quick project. Here is a quick how to showing our process. Materials Needed: 1 x 4 x 8 - Quantity depends on size and quantities of feeder(s) 1-½” - 1-¾” Wood Screws First, I started by cutting a piece for the bottom (measurements vary) and 2 - 1’ pieces for the top. ![Feeder_6.jpg](https://steemitimages.com/DQmZwUdefTQznBfyP9jHkQ1UvbQ3hvCTYGc6nNTr9ukiHwu/Feeder_6.jpg) Next, I cut a piece for the top (measurements vary). ![Feeder_5.jpg](https://steemitimages.com/DQmPCz57TVQn5Du2hcMgpZqp8RSfV31PcN9VTfGQVM2T1cY/Feeder_5.jpg) Then, I cut a piece for the diagonal at the ends. ![Feeder_4.jpg](https://steemitimages.com/DQmT3QnFw43ZQGjzUstqYzuE75JEVztB2JbMimhQZKtWYfM/Feeder_4.jpg) Lastly, I added the vertical slats. Make sure your slats are not wide enough for the goat’s head to fit through, otherwise they could get their head stuck. I also added a piece at the bottom. The piece at the bottom isn’t screwed in, it is just wedged in. ![Feeder_3.jpg](https://steemitimages.com/DQmbsn3r5gtCKgGb7Gi7qcByXEuo9VQAaj4LQtTPi7Aw8kW/Feeder_3.jpg) ![Feeder_2.jpg](https://steemitimages.com/DQmWzsJDLe8mEuVsYL4wJ7E7oxRwMXX1ZyfAvZYTTtbnGwG/Feeder_2.jpg) ![Feeder_1.jpg](https://steemitimages.com/DQmWAwPmrdJWieGDPNsoU44oUzvA9xGHfF8cyPf4h9GB8nn/Feeder_1.jpg) ![homesteading.png](https://steemitimages.com/DQmcvb7cGcU4Jeb9F2zhSTUE3MHAofGWw3Nhgw96GokUiaU/homesteading.png) ## Thank you for viewing! Upvoting, commenting, following, and resteeming are all welcomed and appreciated!