Hey everybody, For those that are running a SPS Validator u probably see something like this now: ![validation errors.jpg](https://files.peakd.com/file/peakd-hive/jef-001/23t7DLN99cx3gSfPGCaaKvCDVkmi7PmKV1EhzzKiLRrRme8BwCRyrwxwMGXkszRruPAhK.jpg) This is an error we shouldn't be getting, the ValidationError means that the validators are no longer creating the same hash from the same data, if this was live and there was no bug it would be a sign that the data was altered, incomplete, or corrupted.

**What did i do to create this.** Since i started with testing on the validators, i have been voting on all new validators that came online, as of yesterday that was 9 or 10, voting for a validator is something we all should do with our SPS, not just the people that are testing the validators, but all SPS stake holders. If i have been doing this from the start, then what triggered this error only now, i also went in the qa environment and claimed and staked my SPS, this was the first time that somebody staked a good amount of SPS while he had voted on this many validators, i have done the same when we were just with 4 and it wasn't a problem back then. Now from what i know, it seems that doing this and changing the stake weight vote on that many validators have caused this error, we'll know more when the devs update us on it.

**Everybody can help test, even those without a license** For this test it doesn't matter that much who u vote for, but when we go live this is the way the top validators are chosen, by stake weight vote, for now u can do this from here [vote for validators](https://thespsdao.github.io/SPS-Validator/account-votes/manage), u will then see the page below, fill in your username where it says Hive Account and click Authorize (pressing enter doesn't seem to work), keychain will pop up and u just sign in to the page. ![image.png](https://files.peakd.com/file/peakd-hive/jef-001/23sxozwpQmNkKsyrtxVVYmu26b6hDXWEMnstwxTjPRTJK6fwaWsDawCp79ae4hhz8DKk1.png) This will take you to the following page, where on the left you can see the validators i voted for and on the right the validators u can vote for, in my case u can see that the buttons are grayed out because i already voted on them. Click vote for the validator u want and sign with keychain, everybody has 10 votes to give out. ![image.png](https://files.peakd.com/file/peakd-hive/jef-001/23tcNzkBD32bHq6MChL1AHX76zAr99SvVzB3o5BPnqKJPGvaWPJnhBu6ZVZySf9hvzC8A.png)

**So what's next for the people running the validator software** For now it's wait for the devs to fix the bug and create a new snapshot, when they have done this we should get a heads up in discord and then we can go to work. To continue u need access to a terminal, so if u still have the terminal open from running the software u can either close it and reopen it after that, you can ignore the warning about the running process, the docker will continue to run even if u close the terminal, what i have done is just open a new terminal and navigate to the right folder with `cd SPS-Validator` if it doesn't open in that folder. Now we need to get the updated software, this first command is something u may not need if you haven't done anything special with git, but `git checkout master` will make sure u are on the master branch of the repository, then with `git pull` u will download the updated software, after that command it should look like this, i used a different command, but that was because i needed to get an older version first to show what it would look like for u. ![git pull.jpg](https://files.peakd.com/file/peakd-hive/jef-001/23tRzahKEp5Zwkp9eK9Ao8MB1pH5HKQhw9UNDRwAFPXjAJhHTjNaS2xCWPmqH8MSdeWXm.jpg) After this we will need to go update the url for the new snapshot that the devs will provide, so depending on how u edited the .env file the first time, use `nano .env` or `gedit .env` to open the .env file, u should see something simular to the screenshot below, i have added a red line under the url we need to change, to be sure u can sopy paste the entire url, but usually the only thing that is changed is the date at the end of the url. Save the changes with control + S and close the editor. ![snapshot.jpg](https://files.peakd.com/file/peakd-hive/jef-001/23tcNnfFq6xSYUDTZbVwHhHwnMtjtTq1C8JYWeFHz2xwtJGfKW3JKUnXPaBSDXQie2n9x.jpg) Now we are going to stop our validator to rebuild it, so to make it a good habit for when we are live we will go either [here](https://thespsdao.github.io/SPS-Validator/validator-nodes/manage) from another pc if u don't have a gui or didn't do `./run.sh start all` when u started the validator or don't have keychain on your device that runs the software, the rest can do the first link also, but also have the option from [here](http://localhost:8888/validator-nodes/manage), for both options it should be the same, u see a input box for Hive Account, enter the account that is used as Validator Account, not the Reward Acount, click Authorize and keychain will pop up and u just sign in to the page, just like we did to activate our validator, now on the right of the screen u see this. ![image.png](https://files.peakd.com/file/peakd-hive/jef-001/23tcP5UHCsU2uHT7pCkCxFzJwQ4T5exKLhemtj3Q5TnwTQee4nhzbj5cVH24rqZJ3cB4R.png) Uncheck the box, press update and sign with keychain to set your validator to inactive, this will prevent missed blocks in the future, it could be that u will still get them now, but we are still in testing phase so it's not that big of a deal now.

This was all the preparation we need to do, now we can stop and rebuild our validator, so back in the terminal enter the `./run.sh replay` command, u will be prompted with a question that u are sure u want to replay, press Y to continue, this will destroy all data u have on your machine and start all over from the snapshot, this is needed to have all validators have the same data again. Next u will what u see in the screenshot below. ![image.png](https://files.peakd.com/file/peakd-hive/jef-001/23tRxRpi9qahC9FwCXcrtGKUxyrrkvh9SMPgSXxJookHcFgXiRqQJLgysiPu8Sdqby817.png) Here also press Y to download the new snapshot and not use the older data, after that u will see the validator beeing build and restarted also, it will need to catch up again, depending on when u do this it can take longer if only see the update later. When u see the "Blocks to head: 0" again, then u can reactivate your validator to get rewards again.

**Key Takeaways** We need all the testers we can get, not just for running the software, but also people that vote for validators and interact with the [qa environment](https://validator.qa.splinterlands.com/), from here do all u can think of that u normally do in the game, 3 things that don't work: burn SPS for DEC, buy CREDITS with SPS and buying spellbook with SPS. For the rest to more that gets tested now, the better we are prepared for what can happen, better find those pesky bugs now.